-
Aktionsflyer: Dieseltankanlagen für sicheres Lagern von Diesel.
Bulldozer Handels G.m.b.H.
A-8120 Peggau, Wilhelm-Jentsch-Straße 4,
Tel: 0043/ (0)3127/28 544
ATU 61685359
E-Mail: office@bulldozer-parts.at
Assembly of a drive in the Enzersdorf workshop
Shovel made for Mustang 520 in our Enzersdorf workshop
News from our workshop in Enzersdorf
Profiled buckets manufactured to customer specifications.
News from our workshop in Enzersdorf
Ripper tooth V70 with 935 kg, OQ80 mount.
Suitable for a 35 - 45 ton excavator.
That was the Bulldozer company event 2024!
On June 14, 2024, the Bulldozer team went to the Erzberg in Styria.
A blasting session organized especially for us, a Hauly ride, plenty of food and drink made the company outing an unforgettable experience for the entire Bulldozer team.
Thank you for visiting us at MAWEV 2024!
​
Four very well-attended trade fair days, many consultations with customers and personal contacts with suppliers, as well as tasty Styrian delicacies.
​
We would like to thank you for your visit and are already looking forward to the next Mawev.
​
Your Bulldozer Team
​
​
TAGE DER OFFENEN TÜR
Das waren die Tage der offenen Tür in unserer Niederlassung in 2431 Enzersdorf a.d. Fischa.
Unsere Besucher erwarteten Produktpräsentationen, Vorführungen und fachmännische Beratung durch unsere Verkäufer. Für das leibliche Wohl war gesorgt und für die Jüngsten gab es Spaß in der Hüpfburg und beim Kinderschminken. Zum Artikel im Österreichischen Baublatt.
Thank you for coming!
Handover of Soosan hydraulic breaker to our customer
In April 2023 we handed over a hydraulic breaker from Soosan (SQ 100) to company Josef Galler from Oberwölz.
Technical data:
Dead weight: 2,185 kg
Percussion rate: 430-5801/min
carrier: 25 - 30 to
Impact energy: 3.776 kJ
total length: 3.168mm - tool Ø: 150 mm
Mr. Galler with our Sales representative,
Mr. Harald Handler and
the Sales Manager of Bulldozer,
Mr. Andreas Aitzetmüller.
Bucket with overflow protection (our workshop in Enzersdorf)
In our workshop in Enzersdorf an der Fischa, a loader bucket (approx. 5 cubic meters) was fitted with teeth, additional underscrew knives and overflow protection - to protect the lifting frame - on the top of the bucket.
Bulldozer rubber pads
- especially wear-resistant rubber compound
- beveled sides: prevents stones from getting stuck
- fastened with high-strength screws
- ready mounted chains with plates and pads available
- in stock for many types of excavators in the 4 - 40 ton class
- Important information: Bulldozer rubber pads are to be mounted / used on steel tracks to protect concrete surfaces. In the short term, BD ALPIN rubber pads can also be used off-road. It should be noted that this considerably shortens the life of the pads considerably!
Flyer
Handover of Soosan hydraulic braker to customer
At the beginning of the year 2023 we have
handed over a hydraulic breaker from Soosan
(SQ 100) to company Styromag.
Technical data:
Weight: 2,185 kg
Impact speed: 430-5801/min
Carrier: 25 - 30 to
Impact energy: 3.776 kJ
Total length: 3.168mm - tool Ø: 150mm
Bucket - regenerated in our workshop in Enzersdorf
This bucket for a 50 to excavator was regenerated with great care in our workshop in Enzersdorf for one of our customers.
NEW BULLDOZER LINE of backhoe buckets
-
Backhoe buckets and embankment buckets for excavator classes from 1 - 30 to
​​
-
Perfect design characterizes the new bulldozer buckets
​​
-
The wear-relevant components of the buckets are made of Hardox and thus guarantee a long life
​​
-
The backhoe buckets in the categories from 18 to are available as standard buckets with Hardox bottom, with additional armor strips and wear-relevant components made of Hardox, but also in the HD version as buckets made entirely of Hardox
​​
-
Of course we can also respond to customer-specific requests and produce a bucket according to the customer's wishes
Wheel loader bucket from our workshop in Enzersdorf
This wheel loader bucket for use on a Volvo L 150 and L 180 was modified according to customer requirements (underscrew blade, overflow protection).
Width: 3.2 m
SAE volume: 4.7 m³
Equipped with high strength 4,5 inch bulldozer tooth tips.
Separator bucket (MB Crusher)
Separator bucket (MB Crusher) with screwed-on adapter plate, suitable for BMT SW2.
Application:
Material crushing
Fine screening of soil
Light crushing and shredding work (e.g. roof tiles)
Suitable for construction machines of 20 - 25 tons.
The separator bucket at work (video)
Ripper
This ripper was manufactured for a 60 ton excavator in our workshop.
made of HB500 S=20 mm left and right
Mounting: Qilquick 90
Weight: approx. 1.600 kg
Trapeze bucket manufactured in our production facility in Enzersdorf
This trapezoidal bucket was manufactured with a 30-degree slope at customer's request.
Operation area:
-
Excavation
-
Cleaning of railway trenches
Bucket completely made of HB 500. Adapter suitable for the Atlas T620 quick coupler.
MB crusher bucket BF 80.3 - light and reliable!
The jaw crusher bucket BF80.3 - here with a magnetic separator and an additional set of teeth at Erdbau Messner in Judenburg - is compact, versatile and suitable for crushing and recycling work both outdoors and in closed rooms. The weight and the reduced dimensions facilitate the movements and make them quick and inexpensive, while efficiency and productivity always remain high. For excavators with 18.5-29 tons
​
To the video
To the technical data sheet
Mr. Max Diethart (left) with our sales representative, Harald Handler.
In our Enzersdorf facility we can ...
-
manufacture bolts on request and
-
regenerate worned-out pins by using a mobile welding device.
Quarry bucket
​
Quarry bucket reinforced design for material extraction Bucket weight 5 to
Wear blade on customer request
​
Our workshop in Enzersdorf has made a special wear blade with teeth for easier entering into the material.
Pliers repair in our workshop in Enzersdorf
​
The shear blade of the concrete pliers had to be repaired. The part was broken due to overuse and was welded and reinforced.
Equipment for the lifting of persons and loads - manufactured in our workshop in Enzersdorf
The equipment for the lifting of persons an loads was manufactured in accordance with DIN EN 14502-1. Approved for 12 people including tools.
Static calculation and approval was carried out by
Ing. Norbert Hofbauer (Hofbauer Maschinenbau).
Client: Kran- und Maschinenverleih Kampel
Backhoe bucket - manufactured by our workshop team
1800 mm, suitable for 45 T with BMT SW3.
Heavy design suitable for demolition work.
Rake from our workshop in Enzersdorf
Rake made of Hardox with screwable adapter plate according to customer requirements. For excavators from 16 to 21 tons.
We celebrate our 15th anniversary!
What started in 2005 with a one-man operation has now developed into an international trading company with 32 employees. From the beginning BULLDOZER Handels G.m.b.H. was specialized with the sale of spare and wear parts, as well as attachments for construction machines.
Years of know-how flow into the individual solution for every requirement.
Customer satisfaction is even after 15 years always the top priority of BULLDOZER.
Handover of a Bulldozer Bucket to company UWS Röthelstein
In July 2020 a shovel was given to company UWS, which was manufactured in our workshop in Enzersdorf.
Details:
Bucket for wheel loader with a quick change unit suitable for Volvo system, Earth bucket, width: 3080 mm, content: 3 m³ water capacity.
[On the photo you can see Mr. Michael Huber from UWS and
our field staff, Mr. Harald Handler.]
Falling Object Protective Structure (FOPS) for excavators - made by our workshop in Enzersdorf
​
Our workshop in Enzersdorf has made a cabin protection. Such a cabin is indispensable, especially for demolition work, if you want to protect your employees or yourself.
We present the new hydraulic breakers from Bulldozer
The BULLDOZER hydraulic breakers have an excellent price-performance ratio.
The Bulldozer hydraulic breakers are suitable for all conventional excavators of the brands CAT, Komatsu, Kobelco, Hitachi etc. with an operating weight of 1.2 to 30 tons.
The silenced hydraulic breaker works with an advanced oil circuit system with lower oil consumption, easy adjustment and high work efficiency. The entire hydraulic breaker is also characterized by advanced design, simple structure, few components, low failure rate and easy maintenance.
Standard equipment:
1 hydraulic hose set (without couplings)
1 tool box
1 N2 nitrogen filling device (without bottle)
1 instruction manual
1 piece of pointed chisel
Incl. central lubrication system
- Installation of BEKA central lubrication possible for an additional charge
- Adapter plates by model for an additional charge
Additional Information
Assembly of a drive in the Enzersdorf workshop
News from our workshop in Enzersdorf
Ripper tooth V70 with 935 kg, OQ80 mount.
Suitable for a 35 - 45 ton excavator.
That was the Bulldozer company event 2024!
On June 14, 2024, the Bulldozer team went to the Erzberg in Styria.
A blasting session organized especially for us, a Hauly ride, plenty of food and drink made the company outing an unforgettable experience for the entire Bulldozer team.
Thank you for visiting us at MAWEV 2024!
​
Four very well-attended trade fair days, many consultations with customers and personal contacts with suppliers, as well as tasty Styrian delicacies.
​
We would like to thank you for your visit and are already looking forward to the next Mawev.
​
Your Bulldozer Team
​
​
TAGE DER OFFENEN TÜR
Das waren die Tage der offenen Tür in unserer Niederlassung in 2431 Enzersdorf a.d. Fischa.
Unsere Besucher erwarteten Produktpräsentationen, Vorführungen und fachmännische Beratung durch unsere Verkäufer. Für das leibliche Wohl war gesorgt und für die Jüngsten gab es Spaß in der Hüpfburg und beim Kinderschminken. Zum Artikel im Österreichischen Baublatt.
Thank you for coming!
Handover of Soosan hydraulic breaker to our customer
In April 2023 we handed over a hydraulic breaker from Soosan (SQ 100) to company Josef Galler from Oberwölz.
Technical data:
Dead weight: 2,185 kg
Percussion rate: 430-5801/min
carrier: 25 - 30 to
Impact energy: 3.776 kJ
total length: 3.168mm - tool Ø: 150 mm
Mr. Galler with our Sales representative,
Mr. Harald Handler and
the Sales Manager of Bulldozer,
Mr. Andreas Aitzetmüller.
Bucket with overflow protection (our workshop in Enzersdorf)
In our workshop in Enzersdorf an der Fischa, a loader bucket (approx. 5 cubic meters) was fitted with teeth, additional underscrew knives and overflow protection - to protect the lifting frame - on the top of the bucket.
Bulldozer rubber pads
- especially wear-resistant rubber compound
- beveled sides: prevents stones from getting stuck
- fastened with high-strength screws
- ready mounted chains with plates and pads available
- in stock for many types of excavators in the 4 - 40 ton class
- Important information: Bulldozer rubber pads are to be mounted / used on steel tracks to protect concrete surfaces. In the short term, BD ALPIN rubber pads can also be used off-road. It should be noted that this considerably shortens the life of the pads considerably!
Flyer
Handover of Soosan hydraulic braker to customer
At the beginning of the year 2023 we have
handed over a hydraulic breaker from Soosan
(SQ 100) to company Styromag.
Technical data:
Weight: 2,185 kg
Impact speed: 430-5801/min
Carrier: 25 - 30 to
Impact energy: 3.776 kJ
Total length: 3.168mm - tool Ø: 150mm
Bucket - regenerated in our workshop in Enzersdorf
This bucket for a 50 to excavator was regenerated with great care in our workshop in Enzersdorf for one of our customers.
NEW BULLDOZER LINE of backhoe buckets
-
Backhoe buckets and embankment buckets for excavator classes from 1 - 30 to
​​
-
Perfect design characterizes the new bulldozer buckets
​​
-
The wear-relevant components of the buckets are made of Hardox and thus guarantee a long life
​​
-
The backhoe buckets in the categories from 18 to are available as standard buckets with Hardox bottom, with additional armor strips and wear-relevant components made of Hardox, but also in the HD version as buckets made entirely of Hardox
​​
-
Of course we can also respond to customer-specific requests and produce a bucket according to the customer's wishes
Wheel loader bucket from our workshop in Enzersdorf
This wheel loader bucket for use on a Volvo L 150 and L 180 was modified according to customer requirements (underscrew blade, overflow protection).
Width: 3.2 m
SAE volume: 4.7 m³
Equipped with high strength 4,5 inch bulldozer tooth tips.
Separator bucket (MB Crusher)
Separator bucket (MB Crusher) with screwed-on adapter plate, suitable for BMT SW2.
Application:
Material crushing
Fine screening of soil
Light crushing and shredding work (e.g. roof tiles)
Suitable for construction machines of 20 - 25 tons.
The separator bucket at work (video)
Ripper
This ripper was manufactured for a 60 ton excavator in our workshop.
made of HB500 S=20 mm left and right
Mounting: Qilquick 90
Weight: approx. 1.600 kg
MB crusher bucket BF 80.3 - light and reliable!
The jaw crusher bucket BF80.3 - here with a magnetic separator and an additional set of teeth at Erdbau Messner in Judenburg - is compact, versatile and suitable for crushing and recycling work both outdoors and in closed rooms. The weight and the reduced dimensions facilitate the movements and make them quick and inexpensive, while efficiency and productivity always remain high. For excavators with 18.5-29 tons
​
To the video
To the technical data sheet
Mr. Max Diethart (left) with our sales representative, Harald Handler.
In our Enzersdorf facility we can ...
-
manufacture bolts on request and
-
regenerate worned-out pins by using a mobile welding device.
Quarry bucket
​
Quarry bucket reinforced design for material extraction Bucket weight 5 to
Wear blade on customer request
​
Our workshop in Enzersdorf has made a special wear blade with teeth for easier entering into the material.
Pliers repair in our workshop in Enzersdorf
​
The shear blade of the concrete pliers had to be repaired. The part was broken due to overuse and was welded and reinforced.
Equipment for the lifting of persons and loads - manufactured in our workshop in Enzersdorf
The equipment for the lifting of persons an loads was manufactured in accordance with DIN EN 14502-1. Approved for 12 people including tools.
Static calculation and approval was carried out by
Ing. Norbert Hofbauer (Hofbauer Maschinenbau).
Client: Kran- und Maschinenverleih Kampel
Backhoe bucket - manufactured by our workshop team
1800 mm, suitable for 45 T with BMT SW3.
Heavy design suitable for demolition work.
Rake from our workshop in Enzersdorf
Rake made of Hardox with screwable adapter plate according to customer requirements. For excavators from 16 to 21 tons.
We celebrate our 15th anniversary!
What started in 2005 with a one-man operation has now developed into an international trading company with 32 employees. From the beginning BULLDOZER Handels G.m.b.H. was specialized with the sale of spare and wear parts, as well as attachments for construction machines.
Years of know-how flow into the individual solution for every requirement.
Customer satisfaction is even after 15 years always the top priority of BULLDOZER.
Handover of a Bulldozer Bucket to company UWS Röthelstein
In July 2020 a shovel was given to company UWS, which was manufactured in our workshop in Enzersdorf.
Details:
Bucket for wheel loader with a quick change unit suitable for Volvo system, Earth bucket, width: 3080 mm, content: 3 m³ water capacity.
[On the photo you can see Mr. Michael Huber from UWS and
our field staff, Mr. Harald Handler.]
Falling Object Protective Structure (FOPS) for excavators - made by our workshop in Enzersdorf
​
Our workshop in Enzersdorf has made a cabin protection. Such a cabin is indispensable, especially for demolition work, if you want to protect your employees or yourself.